WPJ531 OpenWrt bootlog

From Compex Wiki
Revision as of 10:17, 13 April 2016 by Winston (talk | contribs) (Created page with " <nowiki> [ 0.000000] Linux version 3.18.16 (openwrt@gb-15) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46134) ) #1 Mon Jun 29 09:45:50 UTC 2015 [ 0.000000] MyLo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
[    0.000000] Linux version 3.18.16 (openwrt@gb-15) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46134) ) #1 Mon Jun 29 09:45:50 UTC 2015
[    0.000000] MyLoader: sysp=d01be1cb, boardp=17a97e1c, parts=733174db
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803882b0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=WPJ531 console=ttyS0,115200 mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60748K/65536K available (2647K kernel code, 132K rwdata, 548K rodata, 248K init, 194K bss, 4788K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:550.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is Compex WPJ531
[    0.090000] ar71xx: using random MAC address for eth0
[    0.310000] ar71xx: using random MAC address for eth1
[    0.530000] Switched to clocksource MIPS
[    0.540000] NET: Registered protocol family 2
[    0.540000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.550000] TCP: reno registered
[    0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.570000] NET: Registered protocol family 1
[    0.570000] PCI: CLS 0 bytes, default 32
[    0.580000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.620000] msgmni has been set to 118
[    0.630000] io scheduler noop registered
[    0.630000] io scheduler deadline registered (default)
[    0.640000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.650000] console [ttyS0] disabled
[    0.670000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[    0.680000] console [ttyS0] enabled
[    0.680000] bootconsole [early0] disabled
[    0.700000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[    0.700000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.710000] 3 cmdlinepart partitions found on MTD device spi0.0
[    0.710000] Creating 3 MTD partitions on "spi0.0":
[    0.720000] 0x000000000000-0x000000030000 : "u-boot"
[    0.720000] 0x000000030000-0x000000ff0000 : "firmware"
[    0.770000] 2 uimage-fw partitions found on MTD device firmware
[    0.770000] 0x000000030000-0x000000160000 : "kernel"
[    0.780000] 0x000000160000-0x000000ff0000 : "rootfs"
[    0.780000] mtd: device 3 (rootfs) set to be root filesystem
[    0.790000] 1 squashfs-split partitions found on MTD device rootfs
[    0.800000] 0x000000360000-0x000000ff0000 : "rootfs_data"
[    0.800000] 0x000000ff0000-0x000001000000 : "art"
[    0.830000] libphy: ag71xx_mdio: probed
[    1.430000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[    1.440000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.030000] ag71xx-mdio.1: Found an AR934X built-in switch
[    2.070000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.080000] TCP: cubic registered
[    2.080000] NET: Registered protocol family 17
[    2.090000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.100000] Bridge firewalling registered
[    2.100000] 8021q: 802.1Q VLAN Support v1.8
[    2.120000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    2.130000] Freeing unused kernel memory: 248K (803a2000 - 803e0000)
[    3.130000] init: Console is alive
[    3.140000] init: - watchdog -
[    4.330000] usbcore: registered new interface driver usbfs
[    4.340000] usbcore: registered new interface driver hub
[    4.340000] usbcore: registered new device driver usb
[    4.350000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.360000] ehci-platform: EHCI generic platform driver
[    4.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.380000] ohci-platform: OHCI generic platform driver
[    5.140000] init: - preinit -
[    5.690000] random: procd urandom read with 8 bits of entropy available
[    8.520000] eth0: link up (100Mbps/Full duplex)
[    8.820000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    8.870000] eth0: link down
[    8.880000] procd: - early -
[    8.890000] procd: - watchdog -
[    9.570000] procd: - ubus -
[   10.580000] procd: - init -
[   11.410000] NET: Registered protocol family 10
[   11.420000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.440000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   11.450000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   11.460000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.480000] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
[   11.530000] xt_time: kernel timezone is -0000
[   11.570000] cfg80211: Calling CRDA to update world regulatory domain
[   11.570000] cfg80211: World regulatory domain updated:
[   11.580000] cfg80211:  DFS Master region: unset
[   11.580000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.590000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.600000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.610000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.620000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.630000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.640000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.650000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.650000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.750000] PPP generic driver version 2.4.2
[   11.760000] NET: Registered protocol family 24
[   11.820000] ath: EEPROM regdomain: 0x0
[   11.820000] ath: EEPROM indicates default country code should be used
[   11.820000] ath: doing EEPROM country->regdmn map search
[   11.820000] ath: country maps to regdmn code: 0x3a
[   11.820000] ath: Country alpha2 being used: US
[   11.820000] ath: Regpair used: 0x3a
[   11.830000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.840000] ieee80211 phy0: Atheros AR9531 Rev:0 mem=0xb8100000, irq=2
[   11.850000] cfg80211: Calling CRDA for country: US
[   11.850000] cfg80211: Regulatory domain changed to country: US
[   11.860000] cfg80211:  DFS Master region: FCC
[   11.860000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.870000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   11.880000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   11.890000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   11.900000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   11.910000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   18.660000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   18.690000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   18.690000] jffs2_build_filesystem(): erasing all blocks after the end marker... 
[   21.910000] device eth0 entered promiscuous mode
[   21.950000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   22.000000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   45.740000] eth0: link up (100Mbps/Full duplex)
[   45.740000] br-lan: port 1(eth0) entered forwarding state
[   45.750000] br-lan: port 1(eth0) entered forwarding state
[   45.770000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   47.750000] br-lan: port 1(eth0) entered forwarding state
[   57.740000] eth0: link down
[   57.740000] br-lan: port 1(eth0) entered disabled state
[   58.640000] eth1: link up (1000Mbps/Full duplex)
[   58.640000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   66.770000] random: nonblocking pool is initialized
[   79.800000] done.
[   79.800000] jffs2: notice: (912) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  569.950000] eth1: link down
[  574.740000] eth0: link up (100Mbps/Full duplex)
[  574.740000] br-lan: port 1(eth0) entered forwarding state
[  574.750000] br-lan: port 1(eth0) entered forwarding state
[  576.750000] br-lan: port 1(eth0) entered forwarding state
[  578.740000] eth0: link down
[  578.740000] br-lan: port 1(eth0) entered disabled state
[  581.950000] eth1: link up (1000Mbps/Full duplex)