Manual:CompexWRT Changelog/Beta

From Compex Wiki
Jump to: navigation, search


Download Links

For all CompexWRT Downloads: Link

Beta Releases

Changelist for QSDK v5.x

v5.0.7 b170904 Beta

Date Released  : 04 September 2017

  1. Support tx power setting.
  2. Disable root login from ssh.
  3. Change default root password.
  4. Requires Gen3 board for this version onwards.

v5.0.5 b170825 Beta

Date Released  : 25 August 2017

  1. Fix: Luci webpage can't show wireless radio information.
  2. Support RSSI leds.
  3. Corrected bit rate information.

Changelist for QSDK v3.x

Note: Upon upgrade, please uncheck “keep setting” option when flashing firmware between v1.x, v2.x, and 3.x.

v3.1.2 b170830 Beta

Date Released  : 30 August 2017

  1. Fix: uconfig doesn't response after network restart with dynamic DHCP.
  2. disable ssh/telnet root access by default and add su commands.
  3. root password: please request from technical support.

v3.0.9 b170614 Beta

Date Released  : 14 June 2017

  1. apc2: uconfig doesn't response after IP address changed.
  2. apc2: support batch flash firmware.


v3.0.8 b170519 Beta

Date Released  : 19 May 2017


  1. Fix kernel crash when using WLE1000V5.
  2. Support channels scan list in ap mode.
  3. fix wireless interface cannot be used as wan interface.
  4. force script_timeout to 120, as this setting may be kept during firmware update.
  5. luci: rpc: support oem info.

Changelist for QSDK v2.x

v2.4.21 b170830 Beta

Date Released  : 30 August 2017

  1. Fix: uconfig doesn't response after network restart with dynamic DHCP.
  2. disable ssh/telnet root access by default and add su commands.
  3. root password: please request from technical support.

v2.4.19 b170614 Beta

Date Released  : 14 June 2017


  1. apc2: uconfig doesn't response after IP address changed
  2. apc2: support batch flash firmware
  3. force script_timeout to 120, as this setting may be kept during firmware update.

v2.4.18 b170524 Beta

Date Released  : 24 May 2017


  1. support scan list for ap mode acs.
  2. [iwinfo] wait longer for scan results, as time taken may exceed 25 secs if there are many channels.
  3. luci: rpc: support oem info.

v2.4.13 b170303 Beta

Date Released  : 3 March 2017


  1. [qca-wifi] change max txpower limit to support 35dbm on wpj563.
  2. [ar71xx-wpj344] set GPIO 13 to output with default high, so USB is 5V.
  3. [ar71xx-wpj563] use qca-eth ethernet driver, disable openwrt ethernet driver.
  4. [iwinfo-10.4] QCA9563 onboard radio name.
  5. [cpxboards] gen3 support for wpj563.
  6. [faito] prevent frequent write to flash.
  7. [qca-eth] add wpj563 ethernet.
  8. [apc-2] fix flash firmware issue.
  9. [apc-2] fix inaccessible after change WAN physical interface.
  10. [apc-2] prevent 500 error when retrieve iwinfo if wifi is not ready.
  11. [apc-2] support add/remove VAP.
  12. [apc-2] reboot after restore config.
  13. [qcawifi.sh] add uci option to set tempswitch.

v2.4.7 b160907 Beta

Date Released  : 7 September 2016


  1. luci: apc2: allow upload/flash firmware.
  2. luci: apc: fix toggle wifi issue.
  3. qcawifi.sh: fix macfiltering issue.
  4. qsdk: vlan: fix network_fixup conflict vlan.
  5. qcawifi.sh: fix tempswitch missing threshold issue.

v2.4.3 b160810 Beta

Date Released  : 10 August 2016


  1. luci: cpxoeminfo: encrypt cpxoeminfo key.
  2. luci: mesh: fix Mesh Wireless Gateway isn't up.
  3. luci: fix rssi status always show 50%.

v2.4.1 b160727 Beta

Date Released  : 27 July 2016

Public beta version for testing APc2.


  1. config: enable json-rpc2 by default.

v2.1.15 b160201 Beta

Date Released  : 1 February 2016


  1. Added: 5MHz and 10MHz Half/Quarter Channel.
  2. Added: 4.9GHz Super Channel.
  3. Added: Alignment buzzer auto turn off after 10minutes.
  4. Added: Hidden Mesh SSID.
  5. Fixed: uConfig scan issue.
  6. Fixed: Support APC.

Known Issues

  1. APC can't change radio setting, will be fixed in the next release.
  2. Alignment Buzzer is not working, will be fixed in the next release.
  3. 4.9 Super Channels with 600VX and 900VX are not fully tested, we found the channel 4960 isn't working.
  4. 5/10 MHz channel bandwidth is only working with WLE200 in 5G band.
  5. VLAN web configuration is not working, will be fixed in the next release.

v2.1.10 b151211 Beta

Date Released  : 11 December 2015


  1. Fixed: LED Configuration.
  2. Added: Beep beep sound when network is up.
  3. Added: Enable Dynamic DNS.
  4. Added: Enable CDP - Discovery Tab.
  5. Added: Enable WHC (Whole Home Coverage).
  6. Fixed: Station icon.
  7. Fixed: Error to load wifi1 page.
  8. Fixed: Web page error at 2nd radio status at default settings.
  9. Fixed: /etc/config/wireless misconfig after adding miniPCIe radio.
  10. Fixed: Alignment buzzer is not working.
  11. Fixed: 11n channel width does not work as changing bandwidth does not change data rate.
  12. Fixed: No scan list shown when do scanning.
  13. Fixed: L2TP package.
  14. Fixed: DHP client does not work using cable or wireless connection at LAN and WAN.

v2.1 b151208 Beta

Date Released  : 8 December 2015


  1. Fixed: Missing Service Tab.
  2. Added: Beep beep sound when network is up.
  3. Fixed: Missing LED Configuration.
  4. Improved: Uncheck “keep setting”.

v2.0.26 b151116 Beta

Date Released  : 16 November 2015


  1. Fixed: Double fields for Transmit Power.
  2. Fixed: LuCI can not Save & Supply.
  3. Fixed: Can not enable ANI for 11ac from LuCI.
  4. Improved: Improve Regulatory Domain to change to Country Code.
  5. Fixed: eth1 not working for QSDK.
  6. Improved: Log file to keep track of who login (IP) and what changes were done on the AP.
  7. Added: Mesh Roaming (1-2-1 formation, 2-1 formation, Client Roaming between MAP).
  8. Added: UK Band B and UK Band C country codes.
  9. Improved: Tx/RX Antenna bitmask to change to Chainmask Selection.
  10. Added: US PTP, PMP country code to support new Transmit Power of US and CE countries.
  11. Fixed: LuCI on WPJ344 could not get the data from iwinfo.
  12. Added: Implement 11n very high throughput to QSDK.
  13. Added: hints for Outdoor channel feature.
  14. Improved: Merge atheors.sh to support QSDK.
  15. Improved: Merge LSDK driver features to QSDK.
  16. Improved: Merge all branches to trunk.
  17. Added: Enable band steering.
  18. Added: Support Gen3 for QSDK.
  19. Merge scan indicators to 2.1RM.
  20. Added: Support for IPv6 in v2 QSDK firmware.